Cocking bolt

no avatar
Billyboy
Posts: 11
Joined: Tue May 31, 2016 6:56 pm

Cocking bolt

Thu Sep 05, 2019 6:01 am

Should the cocking bolt click back and stay back! till pushed forward when loading?
The cocking bolt on my 410f will slide forward and hinder putting the mag in if the rifle is pointed barrel down.

no avatar
Roger5
Posts: 866
Joined: Sat Jul 25, 2015 8:04 am
Location: Hampton middlesex

Re: Cocking bolt

Thu Sep 05, 2019 8:04 am

All mine do this, not a problem as long as your aware, just don't point it down when inserting the mag ;)

no avatar
Billyboy
Posts: 11
Joined: Tue May 31, 2016 6:56 pm

Re: Cocking bolt

Thu Sep 05, 2019 8:02 pm

Thanks

no avatar
tonyc
Posts: 254
Joined: Mon May 29, 2017 10:55 am

Re: Cocking bolt

Fri Sep 06, 2019 2:01 pm

I insert the mag as I pull the bolt back, so all done in one action. If you leave one chamber empty it's possible to pull back and close the bolt into the empty chamber without cocking the gun. That way I'm never leaving the gun cocked or a pellet in the chamber until I'm ready to take a shot. If you pull back too far and cock the gun, just release the bolt while holding your left finger on the trigger so the gun is uncocked as you allow the bolt forwards into the empty chamber.

no avatar
Billyboy
Posts: 11
Joined: Tue May 31, 2016 6:56 pm

Re: Cocking bolt

Sat Sep 07, 2019 1:36 pm

Thanks

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests