S200 hunter cylinder length

[Pete2]

I've got myself an s200 which I have fitted an xtx pressure gauge with quick fill and their external regulator to the original cylinder. Works well however, not being one to not tinker if there is another option, I am thinking of getting the hunter cylinder to fit.
Its the one that is a bit longer and so holds more air.
Has anyone got one?
What length are they?
Just wondering if there is enough room behind the suppressor to get the external reg, quick fill/pressure gauge and a longer cylinder.
Ta

[Y-Geo]

Hi,
Look up ALTAROS on the web for titanium long cylinders (0.15Ltr as opposed to standard 0.13Ltr ) for the S200.

It will just fit behind the moderator if you fit external reg, Quick fill with guage , however if you need to fit it or take it off for service you will have to remove the moderator first.

You can just buy the actual tube and add your end caps yourself

S & F
Y-Geo

[pelletcaster]

I've a CZ200S .177 Green and AFAIK it originally has the Hunter-cylinder.
I measured 380 mm just for the STEEL tube without the brass on both ends.

Hope this is helpful.

[Pete2]

Thanks guys.