Leaking filler valve
Re: Leaking filler valve
Lebon wrote:Yes and yes
shame you're not closer , i could check it over for you

Re: Leaking filler valve
I've also cleaned all the threads and checked for damage to the filler valve and filler valve body threads and all appears fine, the seals are all new, I'm completely stumped, I guess the next logical step is to replace the cylinder and valve body and filler valve and refit new seals ??
Re: Leaking filler valve
Lebon wrote:I've also cleaned all the threads and checked for damage to the filler valve and filler valve body threads and all appears fine, the seals are all new, I'm completely stumped, I guess the next logical step is to replace the cylinder and valve body and filler valve and refit new seals ??
did you get the seals from me or off ebay ?
if the cylinder is straight and not blown at the end you dont need to replace it , you could try replacing the fill valve body
Re: Leaking filler valve
Are you near Taunton ??
Re: Leaking filler valve
The seals were from bagnall & kirkwood airgun spares
Re: Leaking filler valve
Where do I get the tool to remove the valve body from the cylinder?
Re: Leaking filler valve
The cylinder has a lane reg fitted, could this have anything to do with it ?
Re: Leaking filler valve
Lebon wrote:Are you near Taunton ??
yes i am .
Re: Leaking filler valve
Lebon wrote:The cylinder has a lane reg fitted, could this have anything to do with it ?
only if its leaking from the hole you drilled in the cylinder or it was leaking through the barrel.
Who is online
Users browsing this forum: No registered users and 42 guests