Hammer bounce on S410 classic

[Hunterboy]

Hi guys i have an Airarms S410 classic. I stripped it down because of an air leak whilst it was stripped i polished the hammer and hammer slide now when i tip the gun up or down the hammer slides and makes a noise have i done something wrong it shoots ok.

[Roger5]

Hi guys i have an Airarms S410 classic. I stripped it down because of an air leak whilst it was stripped i polished the hammer and hammer slide now when i tip the gun up or down the hammer slides and makes a noise have i done something wrong it shoots ok.

The only way the hammer could slide is if you left the Hammerspring out, and I doubt that, you will probably find it's the S560 cam plate sliding up and down ( light tinkle sound ) Don't Panic Mr Mannering. Rog

[Hunterboy]

Thanks for that is the S560 the indexing plate. Captain Mannering.

[Roger5]

The cam plate operates the indexing post, if you take the mag out you can see it, watch it while you tip gun up and down, I have one that does the same thing. Rog

[Hunterboy]

You were right spot on.

[Roger5]

You were right spot on.

Yay got one right. Rog