S410 strip guide

[Eddi3]

Hi does anyone have an easy to follow guide link how to strip s410 tdr as I am wanting to polish the hammer and rail and give it some tlc.

[Roger5]

Have a look at this youtube airarms tdr anti tamper disc removal part 1 and pin removal part 2. Rog

[Eddi3]

Have a look at this youtube airarms tdr anti tamper disc removal part 1 and pin removal part 2. Rog

Dh

Hi roger I forgot to mention it's the pre anti tamper I have a rough idea how to get to it but don't want any little surprises flying out, what is recommended for polishing is some thing like brasso suitible

[eboswan]

Have a look at this youtube airarms tdr anti tamper disc removal part 1 and pin removal part 2. Rog

Dh

Hi roger I forgot to mention it's the pre anti tamper I have a rough idea how to get to it but don't want any little surprises flying out, what is recommended for polishing is some thing like brasso suitible

you can use autosol from halfords

[Roger5]

Have a look at this youtube airarms tdr anti tamper disc removal part 1 and pin removal part 2. Rog

Dh

Hi roger I forgot to mention it's the pre anti tamper I have a rough idea how to get to it but don't want any little surprises flying out, what is recommended for polishing is some thing like brasso suitible

you can use autosol from halfords

Autosol is fine, I use Brasso myself only cause I have a tin laying around, undo the 6 bolts in the bolt housing and the tdr is apart, don't lose transfer port seal unless you want to change it. Take barrel band off first. And don't forget to unscrew rear stock fixing screw. Rog plus nearly forgot side plate that holds magazine just 3 bolts,there are no surprises it's an Airarms. Have fun. Rog

[Eddi3]

Seems simple enough thanks rog