Air Arms Owners Club

Hi, I have 2x s200 cylinders and 1x s200 cylinder tube (with hole drilled for regulator)
And a s400/500 cylinder tube 400mm

1x s200 cylinder with gauge (the gauge still works but is bent)(it was a bugger to get off), the tube has been polished (badly) and spray lacquered and chipped.

1x s200 cylinder with old style filler, tube has been carbon wrapped as it had a few marks on it, but still structurally sound

1 X s200 cylinder tube only in spotless blues condition, but has been drilled for a regulator.

1x s400/500 cylinder tube (400mm) has some marks on the blueing but structurally still good, would be ideal for re-blueing.

please see pictures and ask questions if ur interested.

I can swop the valves and filler with different tubes if you require. £60 posted for the lot

I put a 400 mm cylinder on a s510 carbine and it was still shorter than the barrel, however they have the shroud which adds a little extra length to the barrel, so not sure about the 400 carbine.

I believe all the newer 510's come with 400mm cylinders these days.

Just measure it and see.

I had a cylinder tube and a barrel re-blued by Collin molloy for £30 so getting all these tubes re-blued wouldn't cots a lot more I'd think.

Will also sell separately

Hi Stoohundred, PM sent re the s200 bits.
Cheers,
Steve.

All still for sale

pm sent

Stoohundred wrote:All still for sale

Hi Stoohundred

Interested in the polished cylinder with gauge, would you post?

Yes can post, are you aware of the condition of the cylinder and guage as described in the post above?

If it still functions the way it's supposed too, I don't mind how it looks Stoohundred.


PM sent

Did you receive my message Stoohundred?