Cylinder Tubes

[Stoohundred]

image.jpeg (141.67 KiB) Viewed 6420 times

Hi, I have 2x s200 cylinders and 1x s200 cylinder tube (with hole drilled for regulator)
And a s400/500 cylinder tube 400mm

1x s200 cylinder with gauge (the gauge still works but is bent)(it was a bugger to get off), the tube has been polished (badly) and spray lacquered and chipped.

1x s200 cylinder with old style filler, tube has been carbon wrapped as it had a few marks on it, but still structurally sound

1 X s200 cylinder tube only in spotless blues condition, but has been drilled for a regulator.

1x s400/500 cylinder tube (400mm) has some marks on the blueing but structurally still good, would be ideal for re-blueing.

please see pictures and ask questions if ur interested.

I can swop the valves and filler with different tubes if you require. £60 posted for the lot

[Stoohundred]

I put a 400 mm cylinder on a s510 carbine and it was still shorter than the barrel, however they have the shroud which adds a little extra length to the barrel, so not sure about the 400 carbine.

I believe all the newer 510's come with 400mm cylinders these days.

Just measure it and see.

I had a cylinder tube and a barrel re-blued by Collin molloy for £30 so getting all these tubes re-blued wouldn't cots a lot more I'd think.

[Stoohundred]

Will also sell separately

[jinxs]

Hi Stoohundred, PM sent re the s200 bits.
Cheers,
Steve.

[Stoohundred]

All still for sale

[Falconhoof]

pm sent

[Woodworm1972]

All still for sale

Hi Stoohundred

Interested in the polished cylinder with gauge, would you post?

[Stoohundred]

Yes can post, are you aware of the condition of the cylinder and guage as described in the post above?

[Woodworm1972]

If it still functions the way it's supposed too, I don't mind how it looks Stoohundred.


PM sent

[Woodworm1972]

Did you receive my message Stoohundred?