Howdo . anybody own a 177 galahad out there . or shot one . what i want to know is how good is the trigger . EG good enough for comps . how accurate is it at 50 yards and does it have a transfer port like the old 400 . cheers HOLLY I might be wrong, but from the lack of interest to your post, I wou...

As Mark says you will have to change the hammer spring to reduce the power, it's part no CZ023/2 7.5j and Julian for bits. Rog

Personally, I would stop using wadcutters in it and try AADF 4.52, none of my pcps like wadcutters, AADF 4.52 are a bit heavier so your power may go up a bit. Rog You can see from his graphs that this is a 12ftlb rifle,so I don't understand why it's got diopters on it in the first place, and yes I ...

Personally, I would stop using wadcutters in it and try AADF 4.52, none of my pcps like wadcutters, AADF 4.52 are a bit heavier so your power may go up a bit. Rog

I'm hooked on watching the brain deads on this programme!! Todays classic, from another woman. Q, What part of its body does a rattlesnake use to inject venom into its victim? A, ITS TAIL? There is a good side to this, I doubt she will ever get pregnant, thinking about it I might be wrong there, I ...

The cam plate operates the indexing post, if you take the mag out you can see it, watch it while you tip gun up and down, I have one that does the same thing. Rog

Hi guys i have an Airarms S410 classic. I stripped it down because of an air leak whilst it was stripped i polished the hammer and hammer slide now when i tip the gun up or down the hammer slides and makes a noise have i done something wrong it shoots ok. The only way the hammer could slide is if y...

Mr Cook will be rolling in his grave

I strongly advise you to look here Huma- air.com. Everything you need to know regarding Huma internal regs is there.Rog

Just tighten it hand tight air pressure will sort it out, if you have an internal reg I doubt you will be taking cylinder off to fill it and will be filling it by normal fill valve, and you can fill to 190 bar. If you have any problems get on to xtx air.com he will sort you out. Rog