Hi,

most probably the butt pad at the laminated stock is just screwed on too as on all the other models.
https://www.dropbox.com/s/9ed58wcyadki8 ... hunter.pdf

Stupid question I know but - are you sure the cylinder is empty, all the pressure gone? The brackets of your vice shouldn't be to close to the threads you're going to open. You may warm up the tube near the threads with a heat gun so the end part bearing the threads will heat up consequently with li...

OK - I know it's not laminate but why not get the Green, cheek riser and adjustable butt pad included already. m Install a quick fill so no more need to take the cylinder out every time for filling. You may check my tuning report - though in German a lot of pictures - hopefully helpful. m Can't comm...

Many thanks for sharing this valuable information.

It will have to bite into the rifling as you push it home. Have you poked the pellet back out of the breech with a cleaning rod to inspect it for marks? Yes - try this. And push some pellets completely through too to check them carefully 'cause there is a risk of a bur at the edge of the transfer p...

Until replacing any trigger parts you may try some tuning yourself. I did polish - and this means polish not grinding - the sears on the contacting surfaces awa the top of stage-1 and -2 set screws. Polished the side faces, pins and pin-bores too. Further shimmed lateral play with some cut-outs of f...

Kelvin wrote:...I have not tried the trigger adjustments, what is the proper adjustment procedure from scratch?...

Hi Kelvin,

look here - there is a fantastic vid of Neil:
viewtopic.php?f=15&t=3731

And here you'll find some more help:
http://www.airguns.net/general_tx200_trigger.php

...What I did: I ... polished ... and trigger... That sounds like you disassembled and reassembled the trigger. Check trigger weight (screw) - maybe too light. Or stage 1 and/or stage 2 scews set not properly. Did you pull the trigger after installation before trying to cock? May be it's still set....

My mother swore on hot lime-tree blossom tea with honey and some aspirin.
It helps to sweat it out.

Hi,

thank you for another excellent vid.
There aren't too many like you ready to share their gigantic experience and knowledge about AG in a clear & understandable way.

Chappeau
Andreas from Austria