Search found 80 matches

by pelletcaster
Sat Oct 06, 2018 10:11 am
Forum: General airgun chat
Topic: S510 Ultimate Sporter XS Chronograph Chart
Replies: 36
Views: 14735

Re: S510 Ultimate Sporter XS Chronograph Chart

By far no specialist just a shooter that likes to fettle your shotstring does not look like a regulated one. May be the reg pressure and/or hammer spring tension are set to low. Acc. to your figures your gun seems to output about 31 fpe / 42 Joule. It needs about 11 shots to come from 220 bar down t...
by pelletcaster
Tue Aug 07, 2018 8:32 pm
Forum: TECHNICAL
Topic: TX200 Transfer port
Replies: 1
Views: 1781

Re: TX200 Transfer port

It's not only the diameter but the length too that plays an important role. My HC shows a TP of 3,75 x 9,80 / stroke length 86 mm giving a SCR (static compression ratio) of 390. My LGU has a TP of 3,20 x 6,00 / stroke length 85 mm giving a SCR of 865. Both excellent guns in .177 but the LGU (11,3 fp...
by pelletcaster
Fri Jul 27, 2018 7:24 pm
Forum: Spring guns and tuning
Topic: Prosport piston
Replies: 5
Views: 3343

Re: Prosport piston

Never had a Prosport - too sad but still on my wish list anyway. So I just can give you the inside depth of my TX200 HC - 110 mm. From fettling LGV/LGU I know that washers/tophats can sit quite persistently inside the piston due to old grease. Put the piston head down and fill some grease dissolving...
by pelletcaster
Wed Jan 31, 2018 8:28 pm
Forum: Off topic chat
Topic: Who is here
Replies: 157
Views: 193833

Re: Who is here

Me too. :D
by pelletcaster
Sat Sep 16, 2017 9:14 am
Forum: TECHNICAL
Topic: BEST FITTINGS Quick Coupler O-ring size
Replies: -1
Views: 1562

BEST FITTINGS Quick Coupler O-ring size

Hi lads, I'm filling my PCPs via a QC. Now the O-ring is worne, leaks and has to get replaced. So anxiously trying to find the dimensions/specs for the small O-ring inside down a FOSTER-type BEST FITTINGS Quick Coupler QC02. Thanks in advance for any useful information. BTW - I sent an inquiry to BE...
by pelletcaster
Tue Aug 29, 2017 5:58 pm
Forum: TECHNICAL
Topic: Trigger setting
Replies: 8
Views: 5201

Re: Trigger setting

Thanks!
by pelletcaster
Sun Aug 20, 2017 7:53 pm
Forum: TECHNICAL
Topic: Deposits in the New TX200 Barrel
Replies: 16
Views: 7785

Re: Deposits in the New TX200 Barrel

I had been reading the thread on the other forum sience it got started. Frankly I did not know what to think about this matter but after all the efforts of removing the "stain" and finally seeing the HQ-picture there and now here I think its clearly some kind of pitting / damage to the ste...
by pelletcaster
Mon Jul 24, 2017 4:55 pm
Forum: Spring guns and tuning
Topic: How to polish the Spring ends
Replies: 10
Views: 7439

Re: How to polish the Spring ends

I firstly take a file and grind off the sharp edges at the wire end as they are prown to bite under load into facing material. Then wet & dry 400 grit on a flat surface will do. Very seldom followed by 600 or 800 grit. Main purpose is to get rid of the sharp edges. Some smoothened burrs left wil...
by pelletcaster
Mon Jul 24, 2017 4:30 pm
Forum: Spring guns and tuning
Topic: cd trigger adjustment dumb Qs
Replies: 4
Views: 5164

Re: cd trigger adjustment dumb Qs

As the design is more than similar I wouldn't recommend dry firing for the CD too though just from pictures it seems that serious damage is less likely. Mine is in my TX so can't check it in reality now. At the Rekord if the trigger case is out of its place the upper sear is completely free and it w...
by pelletcaster
Mon Jul 24, 2017 10:31 am
Forum: TECHNICAL
Topic: S200 mk3 barrel movement ether L/R
Replies: 6
Views: 3672

Re: S200 mk3 barrel movement ether L/R

I cut the top of the barrel band completely. Barrel is free floating now. Accuracy increased. Ensure that cylinder will not touch the underside of the sight base. https://www2.pic-upload.de/thumb/31385107/20160805-07_CZ200Sgreen_43SupportingBracketcut_total.jpg https://www2.pic-upload.de/thumb/31385...