Plastic granules from the Bay work very well and are a lot lighter than rice, but a lot more expensive too!

Alan

Mine went up 30 fps from 190 bar to its max at 145 bar. Not all S400's are created equal, but as our American friends say, you do the math!

Alan

You could try Tommy Bennet of Tillygunstocks. His work is excellent and he's a great guy to deal with. You'll find him on Facebook.

Alan

Although I've taken out several venturi AT's successfully, after a recent incident involving a broken drill, a lot of swearing and a lot of damage (fortunately to my own rifle otherwise it would have been very embarrassing :oops: ) I will just buy a new firing valve body. Call me a coward, but.... :...

John814ce wrote: ↑

Fri Jan 11, 2019 7:52 pm

Check google about the court case were the guy took the police to court stating he only used a certain pellet with his gun and he won the court case.

Can you point us at the article please? I've tried to find it, but can't.

I have built up a stock of all the screws and just replace any that look dodgy when I have the gun apart. I can't remember the exact number, but there's less than a dozen different types. The ones that take most of the strain are M4x16 SKT and M3x16 SKT which are used in several places. I don't see ...

Good news

Since warranties are over and above your legal rights (or if they're not, don't use them) they can be given by anybody. It's usually the manufacturer but it could be the retailer or your friend in the pub if it comes to that. You must deal with whoever gave the warranty. In this case, I suggest you ...

http://rowanengineering.com/products1.htm#s410ssl

Alan

Any suggestions on the best method to empty the cylinder in order to make the change? Just gently crack open the bolt that attaches the alloy gauge mount and wait until the hissing stops! Make sure you've got spare O-rings (6x1 and BS008) in case one or both get damaged (its a good idea to replace ...