Search found 40 matches

by Jammy13
Fri Aug 28, 2020 7:58 pm
Forum: Welcome back
Topic: Hello from across the pond
Replies: 3
Views: 586

Re: Hello from across the pond

Hello John and welcome. I cured the clipping on 2 s510's and posted my method. The info should apply to s410's. Here's the link: - http://www.airarmsownersclub.com/viewtopic.php?f=15&t=5706 Be aware the barrel must not move within the shroud. If it does you most likely have a problem with the fluted...
by Jammy13
Fri Aug 14, 2020 7:06 pm
Forum: TECHNICAL
Topic: S410 clipping issues
Replies: 16
Views: 548

Re: S410 clipping issues

John, if you copy the link below you may find a similar air rifle to yours. Https://www.pyramydair.com/manuals I'm beginning to think someone has fitted a non standard Air Arms moderator that has a different method of fitting to the shroud so have fitted the plastic part into the shroud to accommoda...
by Jammy13
Thu Aug 13, 2020 5:12 pm
Forum: TECHNICAL
Topic: S410 clipping issues
Replies: 16
Views: 548

Re: S410 clipping issues

John,
a thought I have, use a drill bit of the correct size and slide it through the moderator. This will check that there are no damaged baffles inside the moderator. It should slide through without any resistance.

Keith
by Jammy13
Thu Aug 13, 2020 4:56 pm
Forum: TECHNICAL
Topic: S410 clipping issues
Replies: 16
Views: 548

Re: S410 clipping issues

Hi John,
this is what I have. I'm sure it will provide what you need. A google should bring it up, or something similar.

air-arms-s510-s410-FAC-manual.pdf

Keith
by Jammy13
Thu Aug 13, 2020 2:11 pm
Forum: TECHNICAL
Topic: S410 clipping issues
Replies: 16
Views: 548

Re: S410 clipping issues

Hi John, I cured clipping on 2 s510's. Perhaps the link below on how I did it will be of help. Particularly the refitting of the shroud and positioning of the figure of 8 barrel clamp. You can try this without removing the moderator. http://www.airarmsownersclub.com/viewtopic.php?f=15&t=5706 Keith
by Jammy13
Fri Jul 10, 2020 6:53 pm
Forum: TECHNICAL
Topic: S510 Classic with bad grouping
Replies: 35
Views: 2079

Re: S510 Classic with bad grouping

Hi Patratel, I've read through the various posts about your problem. Early in your postings you said you glued a washer onto the barrel because it was moving around within the shroud and it was still moving, if I read it correctly. You also had Al fillings showing. The Al spacer needs 2 new 'O' ring...
by Jammy13
Sat May 30, 2020 2:57 pm
Forum: General airgun chat
Topic: Pest control and other shooting is allowed
Replies: 0
Views: 782

Pest control and other shooting is allowed

Following questions to the relevant government departments via Sir Geoffrey Clifton-Brown ( see Parliamentary response) the BASC has confirmed shooting is allowed with some restrictions in Wales and Scotland. Here is the BASC link and click on pest control and read the part concerning the part of th...
by Jammy13
Wed May 06, 2020 5:16 pm
Forum: TECHNICAL
Topic: NIGHT VISION
Replies: 3
Views: 511

Re: NIGHT VISION

Hi Sommerfields Trout, I have a Nitesite Viper that is spare. It's complete with everything that came with it when new and works perfectly and isn't beat up and is complete with the original case. It looks almost new. If you are interested drop me a PM(personal message). Regards, Keith
by Jammy13
Fri May 01, 2020 4:43 pm
Forum: Jokes and Jest
Topic: Your duck is dead
Replies: 5
Views: 838

Your duck is dead

Your DUCK IS DEAD A woman brought a very limp duck into a veterinary surgeon. As she laid her pet on the table, the vet pulled out his stethoscope and listened to the bird's chest. After a moment or two, the vet shook his head and sadly said, "I'm sorry, your duck, Cuddles, has passed away." The dis...
by Jammy13
Tue Mar 03, 2020 6:48 pm
Forum: TECHNICAL
Topic: QTec silencer - S510 carbine
Replies: 3
Views: 7358

Re: QTec silencer - S510 carbine

Yes Tony the standard QTec does vent back down the shroud and vents through the holes where the shroud reaches the action. I think it acts as an air stripper as well and probably causes some of the sound to go down the shroud so if hunting the quarry is less aware of where the shot came from. I'm th...