Thanks but there’s a s510 muzzle break on eBay for sale. It’s black and I think it would look nicer than the silver one already on the 500.

Will a muzzle break from an s510 fit on a HFT500?

https://drive.google.com/file/d/1rl8EG5rxROJEiNPMbuGU1x_MZrl_XJXA/view?usp=drivesdk https://drive.google.com/file/d/1-8qBKQ7R7PTUayx_AYpn2cOZGc9s3CVP/view?usp=drivesdk JSB heavy gave a spread of about 2.5cm at 50yds. QYS was <2cm. I also got some lighter weight .55g QYS to compare to the .62g QYS. ...

RichieRich612 wrote: ↑

Thu Jun 20, 2019 10:08 pm

Have you tried the Jsb Heavies in .177?

Just bought some. I’ll give them a go. Thanks.

https://drive.google.com/file/d/1fbcNyG8_YSbgfWJmCH7tXRO216zRBNj8/view?usp=drivesdk https://drive.google.com/file/d/1fbcNyG8_YSbgfWJmCH7tXRO216zRBNj8/view?usp=drivesdk Not sure if the image above is working, but I fired 10 shots of each, 50yds, very little cross-wind. H&N barracuda and AA diabolo ~...

Then tried without the silencer. Big difference in poi at 50yds. Guess my gun prefers QYS pellets and the neighbours will have to put up with the bark from the HFT. Did the group open up with the moderator or was the POI simply in a different place? A moderator will nearly always change the POI, bu...

TenMetrePeter wrote: ↑

Sun Jun 16, 2019 9:54 pm

A moderator with all the innards taken out and the exit hole opened up to 8mm (for .177) will still soak up half of the noise with minimal disruption. Stick a velcro curler inside even better.

Thanks Pete, I may give this a go in the future if noise becomes a problem.

What’s a Velcro curler?

https://drive.google.com/file/d/1fO9Jx7dFCJEF--XdgYQ5XZ_80ykdtkdn/view?usp=drivesdk Did some investigation tonight. HFT 500. Zeroed WITH silencer at 25yds. I tested AA diabolo, JSB exact, QYS, H&N barracuda. Best 2 at 25yds we’re JSB and QYS. Pushed out to 50yds. Little wind unfortunately. Then tri...

Thanks Alan, I’m sure I will have plenty of fun 😆 especially with the weather improving. You’re stock looks great. Not sure I’m gonna go down that route until I’ve exhausted trying the new one. I’ve bought a blade trigger 3D printed jobby which I’ve sanded down to smooth and made be more respectable...