A little lost in translation here I think lol The shot string I was referring to was done before I noticed the leak from the power adjust grub screw, another test after fixing the leak has brought the results back up to around what you mentioned 👍 Also adjusting the screw did adjust the power to, I ...

So I managed to get down the range and Perform another set of test which ended up basically the same... First shot start around the 710fps mark and gradually rises to about 790-780 over 150 shot again. Only difference now is when it drops off around 100 bar it doesn’t spike down and up like the last...

Update.. Think i might have found the problem.... So i took the cylinder off tonight go have a look at the Pot which was still set at 57.5mm form when i last serviced and adjusted it. When i removed the Pot i noticed which i can only assume was an over site on my own behalf from last time i serviced...

Hi guys, Gun history.... I’ve had the rifle from new, coming up 4 years now, when I first serviced the gun about a year ago the firing pot and grub screw had managed to work there way loose as you suggested it may have, but I reset the pot to 57.5mm I believe I did at the time.. not 100% sure tho, B...

Hi all, my first post here so please bear with me.. So I decided to do a full chrony on my s400 superlite from a full tank of 190 all the way down to 100 bar so I could get a much better understanding of where exactly my sweet spot starts and ends rather then just going with the obligatory fill to 1...