I have an S200 with the 2 piece stock. It's .177 and I am looking to install a regulator in it. I would like to run it under 12 ft/lb. I am in NZ and going over that isn't an issue, but I want it sub 12 . Currently I can't get it over 10.5/11 ft/lb. I have the venturi screw out and hammer in as far ...

Well done! That's a lovely piece of work there. I too am looking to make a new blade in the future.

I am working on an EV2 Mk4, that I could end up buying, and am struggling to find much info on them. Even AA site doesn't have any info. If anyone has some useful links, in particular regulator and valve details.

Thanks
Paul.

I fitted a regulator in my S510, and couldn't get it to seal. It ended up being the tank. It had big crevices in it, and I ended up having to grind the surface down to get the O rings to seal. will try upload photo.
]

Hi all! I am doing a small project for a friend, fitting an S510 carbine into a bullpup stock. To do this I need to remove the shroud so the barrel will fit through the scope mount brackets. Unfortunately there isn't enough meat on these brackets to make the hole bigger. So I plan to cut the shroud ...

Of course, I'm sure if AA were putting regs in, the cylinder would be better. If those marks are just part of the manufacturing process, it's good to know before hand, as I feel I'm fortunate to get a seal. Just something to go into the memory banks for next time. I would expect stress cracks to be ...

http://i1381.photobucket.com/albums/ah222/PaulyB4/98%20damage/20181129_223850_zps2ukgywyv.jpg I had fitted a reg into my S510, but always had a slow leak from the breather hole. Changed all the o rings and polished the cylinder. Then I watched Robert Lane videos and he said 99.99 % of breather hole...

Fittings are custom made by wingman. He originally made a Marauder bullpup. (See the link.) http://nzairgun.com/forum/index.php?topic=325.0 The mounts are attached to the tank, and the shroud is free floating through them. The mounts are also used to attach the trigger linkage. https://i.imgur.com/H...

You would have to think there's a problem with the reg then maybe. Been a good thread to follow, enjoying it.